Training Courses in Mackay

Certificate IV Work Health and Safety
This program caters for both experienced and new personnel wanting to further their knowledge and skills in Workplace Health and Safety (WHS).
Fire Safety Advisor
This Fire Safety Advisor course is designed for Wardens and Chief Wardens specifically working in the capacity of supervisor, trainer, and evacuation plan procedures. This is a nationally accredited training program. Upon successful completion of the course, participants will receive a nationally recognised Statement of Attainment in the following, PUAFE004 Respond To Facility Emergencies (Fire Evacuation), PUAFE008 and Confine small emergencies in a facility, PUAFER005 Operate as Part of an Emergency Control Organisation, and PUAFER006  Lead an Emergency Control Organisation.
CPCCWHS1001 Prepare To Work Safely in the Construction Industry
CPCCWHS1001 Prepare To Work Safely in the Construction Industry induction course is mandatory within the building and construction industry.
CPR Low Voltage Rescue Training
CPR/ Low Voltage Rescue training provides participants with the competence required to perform CPR on an unconscious casualty, in situations where they would have been electrocuted. Low Voltage Rescue (LVR) teaches participants how to rescue a person that has been electrocuted while using low voltage equipment. Participants will gain the confidence and competence required to perform CPR on an unconscious person. Upon successful completion of the program, participants will receive a nationally recognised Statement of Attainment for UETTDRRF06 Perform Rescue from a Live LV Panel and HLTAID009 Provide cardiopulmonary resuscitation.
Fire Evacuation and First Response Training
This Fire Safety Advisor course is designed for Wardens and Chief Wardens specifically working in the capacity of supervisor, trainer, and evacuation plan procedures. This is a nationally accredited training program. Upon successful completion of the course, participants will receive a nationally recognised Statement of Attainment in the following, PUAFE004  Respond To Facility Emergencies (Fire Evacuation), PUAFE008 and Confine small emergencies in a facility.
Fire Safety Advisor
This Fire Safety Advisor course is designed for Wardens and Chief Wardens specifically working in the capacity of supervisor, trainer, and evacuation plan procedures. This is a nationally accredited training program. Upon successful completion of the course, participants will receive a nationally recognised Statement of Attainment in the following, PUAFER001 Identify, prevent and report potential facility emergency situations, PUAFER002 Ensure facility emergency prevention procedures, systems and processes are implemented, and PUAFER003 Manage and monitor facility emergency procedures, equipment and other resources.
Fire Warden
This Fire Safety Advisor course is designed for Wardens and Chief Wardens specifically working in the capacity of supervisor, trainer, and evacuation plan procedures. This is a nationally accredited training program. Upon successful completion of the course, participants will receive a nationally recognised Statement of Attainment in the following, PUAFE004 Respond To Facility Emergencies (Fire Evacuation), PUAFE008 and Confine small emergencies in a facility, and PUAFER005 Operate as Part of an Emergency Control Organisation.
Health and Safety Representative Training Course
This course is designed for the elected Health and Safety Representative (HSR) or Deputy HSR for your workgroup under the Work Health and Safety (WHS) legislation in QLD.
First Aid Training Course
This program applies to all workers who may be required to provide a first aid response. Upon successful completion of the program. Upon successful completion of the program, participants will receive a nationally recognised Statement of Attainment for HLTAID009 Provide cardiopulmonary resuscitation, HLTAID10 Provide basic emergency life support, and HLTAID011 Provide First Aid.
Training & Assessment Course at Shrap5
This In Field Workplace Trainer and Assessor qualification reflects the roles of individuals delivering training and assessment. It is suitable for trainers and assessors' services in the vocational education and training (VET) sector. The units of competency covered are TAEASS402 Assess competence and TAEDEL301 Provide work skill instruction.
Standard 11 Surface Program Course
This Standard 11 unit describes a participant’s skills and knowledge required to escape from hazardous situations.  This unit is appropriate for those working in operational roles in Coal and Metalliferous mining. Upon successful completion of the program, participants will receive a nationally recognised Statement of Attainment for RIIERR203D Escape from hazardous situations unaided (underground only) - E version.
G2 Risk Management Program
This unit is appropriate for those working in supervisory, risk management or technical specialist roles. Upon successful completion of the program, participants will receive a nationally recognised Statement of Attainment for RIIRIS402E Carry out the risk management process.
Operate & maintain a 4WD vehicle Course
The Operate and Maintain a 4WD Vehicle training is a practical driving course. It is designed to familiarise drivers with the correct use of appropriate range (high or low range), gears and techniques.
Enter and Work in a Confined Space
RIIWHS202E Enter and Work in a Confined Space training unit specify the competency required to undertake safe working practices. This unit is appropriate for those working in an operational role at worksites within Civil Construction, Coal Mining, Drilling, Extractive industries & Metalliferous mining. Upon successful completion of the program, participants will receive a nationally recognised Statement of Attainment for RIIWHS202E Enter and Work in Confined Spaces and MSMWHS217 Gas test atmospheres.
working safely at heights training course
This work safely at heights unit specifies the competency required to undertake safe working practices when working at heights or depths. This is a nationally accredited training program. Upon successful completion of the program participants will receive a nationally recognised Statement of Attainment for RIIWHS204E Work Safely at Heights.
S123 Mine Supervisor Course at Brisbane
This S123 Mine Supervisor course is mandatory for all Supervisors in the mining industry. It meets the fundamental requirements of a Mine Supervisor in the Resources Industry as per s.56 of the Coal Mining Safety and Health Act 1999 and s.51 of the Mining and Quarrying Safety and Health Act 1999. Upon successful completion of the program, participants will receive a nationally recognised Statement of Attainment for RIIRIS301E - Apply Risk Management Processes, RIIWHS301E - Conduct Safety and Health Investigations, and RIICOM301E - Communicate Information.
S123 Mine Supervisor Course at Brisbane
This S123 Mine Supervisor refresher course is recommended every 5 years. This is as per Reg. 84 of the Coal Mining Safety and Health Regulation 2017 (Qld). The s123 Mine Supervisor refresher course meets the requirements for the position of a Mine Supervisor in the Resources Indus, RIIWHS301E Conduct Safety and Health Investigations, and RIICOM301E Communicate Information.
Safely Access the Rail Corridor Training
SARC training is suitable for people working within the rail industry and or those who are required to access the rail corridor under supervision in accordance with access provider, legislative and regulatory requirements. Upon successful completion of the program, participants will receive a nationally recognised Statement of Attainment for TLIF2080 Safely Access the Rail Corridor.
Standard 11 Surface Program Course
The purpose of this program is to introduce new and existing mine workers to the recognised Standard 11 Mining Induction requirements.
Standard 11 Combined Refresher Course
The Standard 11 Surface and Underground refresher program is delivered by experienced facilitators via interactive scenarios and group-based activities. The group-based scenarios will give participants a realistic insight into the requirements for working within the Queensland Coal Mining Industry.
Standard 11 Surface Program Course
This is an industry-accepted Standard 11 Surface Program course. It is specifically designed to cater to the Coal Mining Industry. All newcomers with little experience in the resources sector are required to undergo Standard 11 induction. The program provides newcomers with a pathway to enter the Mining Industry In Australia.
TAE Delivery Cluster
This TAE40116 Certificate IV in Training and Assessment qualification reflects the roles of individuals delivering training and assessment services in the vocational education and training (VET) sector. This is a nationally accredited training program. Upon successful completion of all 3 units of competency, TAELLN411  Address adult language and numeracy skills, TAEDEL401 Plan, organise and deliver group-based learning, TAEDEL402 Plan, organise and facilitate learning in the workplace participants will receive a nationally recognised Statement of Attainment.
TAE Design Cluster
TAE Design Cluster enables you to gain the skills to assist in developing learning programs in the vocational education sector including the ability to analyse and unpack training packages and or units of competency to design programs to suit your clients/workplace needs. This is a nationally accredited training program. Upon successful completion of all 3 units of competency, TAEDES401 Design and develop learning programs, TAEDES402 Use training packages & accredited courses to meet clients’ needs, TAEASS502  Design and develop assessment tools participants will receive a nationally recognised Statement of Attainment.
Training & Assessment Course
This TAE40110 Certificate IV in Training & Assessment refresher qualification reflects the roles of individuals delivering training and assessment services in the vocational education and training (VET) sector. Upon successful completion of units of competency, participants will receive a nationally recognised Qualification for TAE40116 Certificate IV in Training and Assessment.
Training & Assessment Course
This TAE40116 Certificate IV in Training and Assessment qualification reflects the roles of individuals delivering training and assessment services in the vocational education and training (VET) sector.